- Unfinished wood, easy to finish
- Made from durable hardwood
- Strength Group: B6 (same group as maple)
- Density: 7+ (Birch: 7, Ash: 8)
- Ready to assemble
International Concepts Accent Table, 14 L x 16 W x 20 H inches, Unfinished
Original price was: $59.99.$41.19Current price is: $41.19.
Sherri –
I love this table so much that I order 3. I have stained them all a little differently. At first I checked the thrift stores for tables this size, but the ones I found were more expensive and not as nice as this one. On the last one, I only stained the legs and bottom trim of the top table. I like the natural light color and wood grain.
Jane W. –
I purchased this item as a stand for a my printer. Please note the dimensions of this item because it’s smaller than an end table and shorter than a typical accent table — but that’s what I needed because I was fitting it in under a kitchen bar. The table was fairly easy to assemble if you’ve ever assembled wood furniture. I stained and painted mine and it came out good. I couldn’t find anything close to the price for a solid wood table. All of the furniture stores wanted hundreds of dollars for one and the big box stores only had cheap luminant tables. I would recommend this item.
DebPet –
The quality of the wood is top notch. The cuts and pre-assembly is top-notch.
You can tell that care was taken in the production of these pieces. Thank you “Made in Vietnam.”
I took the time and effort to use Rustoleum spray paint to add color. Before assembly!
A couple of coats, some light, block sanding in between coats, some satin clear coat on the table top and … Bob’s you Uncle.
Gary54 –
I have bought a lot of their stuff lately. Tables, Desks, Chairs, Plant stands, Cabinets, Drawer chests, TV stands. It’s honest, Well-made, Well design, Nice hardware.Easy To put together. Against several other things that they made them, And I’m bummed out that they discontinued themWindsor office chairs.
The perwould is nice, The butcher block well-done, Nicely sanded. The drawer hardware is nice. , Can you send shelf clips are good quality. Everything is nicely packed. I have yet to have a single disappointment.
If honest and well made and durable is your thing Road than fancyShiny finishes on on something that is going to fall apart year. The stuff is your ticket.
For finishing if I wanted stained I use wWatco danish oil, Wait a week Three coats social act 1/2 half pound cut, Two coats of Minwax spray lacquer. San between coats. There’s 3 3M Sponge sanding block for gratefulness. I want to clear finish I just eliminate what upthe Watco.
Great stuff highly recommended
DebPet –
I’m happy with these tables. Stained and polyed to match other furniture. Thanks for a good simple table.
William –
I was immediately impressed when I opened the box: everything was well packed to avoid shipping damage, very little assembly needed, easy to put together, and it arrived fully sanded and ready to stain. I’m modifying the table for a project I’m working on and I would buy this again as an excellent base to work from or simply as a good, sturdy table.
Kam –
Love that the console table is all wood and the right size for my small entryway. Didn’t love that one of the legs could not be attached because the metal insert inside the leg was loose so that as you screwed the leg to the table top it pulled the insert out of the leg. Had to go get a larger size and fill the hole with wood filler to get the leg attached. Once the bottom shelf was attached everything was sturdy. Four stars because it’s pretty, smooth wood and perfect for my needs despite the extra work.
Helps2Review –
I ordered two of these tables to act as nightstands. I wanted something that was solid wood and not terribly expensive. When the tables arrived one was packaged better than the other. One table was shrink wrapped and the other wasn’t. Thankfully there was no major damage to either. I was happy to see the table is solid unfinished wood. The tabletop felt sturdy. There were some finishing marks and small dings on both, but nothing to warrant a return.
Once I began the assembly process I observed the following:
First – The directions are picture-based. As in here is a picture of how it should look now build it.
Second – One of the bolts that secures the legs to the table was poorly machined. The threads were falling off. I tried to make it work, but ultimately I will need a new bolt. I have a big problem with this since it isn’t hard to check your hardware before bagging it.
Third – When screwing the legs to the table the wood creaked as I was bolting things together. I was afraid I would split the wood so I kept things relatively loose.
Forth – The platform below the table top did not have screw holes for attaching the legs to the platform. I used a drill to screw things together. I imagine you could use a screwdriver and do it by hand, but that would be a pain in the wrist. Ideally the company would drill pilot holes like they did on the legs.
Overall I am happy with the tables because they are solid wood and affordable. I doubt I will buy any of this company’s other offerings.